1976 South Carolina Code of Laws
Unannotated
Updated through the end of the 2011 Session
DISCLAIMER
The South Carolina Legislative Council is offering access to the unannotated South Carolina Code of Laws on the Internet as a service to the public. The unannotated South Carolina Code on the General Assembly's website is now current through the 2011 session. The unannotated South Carolina Code, consisting only of Code text, numbering, and history, may be copied from this website at the reader's expense and effort without need for permission.
The Legislative Council is unable to assist users of this service with legal questions. Also, legislative staff cannot respond to requests for legal advice or the application of the law to specific facts. Therefore, to understand and protect your legal rights, you should consult your own private lawyer regarding all legal questions.
While every effort was made to ensure the accuracy and completeness of the unannotated South Carolina Code available on the South Carolina General Assembly's website, the unannotated South Carolina Code is not official, and the state agencies preparing this website and the General Assembly are not responsible for any errors or omissions which may occur in these files. Only the current published volumes of the South Carolina Code of Laws Annotated and any pertinent acts and joint resolutions contain the official version.
Please note that the Legislative Council is not able to respond to individual inquiries regarding research or the features, format, or use of this website. However, you may notify Legislative Printing, Information and Technology Systems at [email protected] regarding any apparent errors or omissions in content of Code sections on this website, in which case LPITS will relay the information to appropriate staff members of the South Carolina Legislative Council for investigation.
Title 12 - Taxation
CHAPTER 14.
ECONOMIC IMPACT ZONE COMMUNITY DEVELOPMENT ACT OF 1995
SECTION 12-14-10. Short title.
This chapter may be cited as the Economic Impact Zone Community Development Act of 1995.
HISTORY: 1995 Act No. 25, Section 2.
SECTION 12-14-20. Purpose.
It is the purpose of this chapter to establish a program of providing tax incentives for the creation of capital investment in order:
(1) to revitalize capital investment in this State, primarily by encouraging the formation of new businesses and the retention and expansion of existing businesses; and
(2) to promote meaningful employment.
HISTORY: 1995 Act No. 25, Section 2; 2010 Act No. 290, Section 20, eff January 1, 2011.
SECTIONS 12-14-30 to 12-14-50. Repealed by 2010 Act No. 290, Section 38, eff June 23, 2010.
SECTIONS 12-14-30 to 12-14-50. Repealed by 2010 Act No. 290, Section 38, eff June 23, 2010.
SECTIONS 12-14-30 to 12-14-50. Repealed by 2010 Act No. 290, Section 38, eff June 23, 2010.
SECTION 12-14-60. Investment tax credit.
(A)(1) There is allowed an investment tax credit against the tax imposed pursuant to Chapter 6 of this title for any taxable year in which the taxpayer places in service qualified manufacturing and productive equipment property.
(2) The amount of the credit allowed by this section is equal to the aggregate of:
three-year property one-half percent of total aggregate bases for all three-year property that qualifies;
five-year property one percent of total aggregate bases for all five-year property that qualifies;
seven-year property one and one-half percent of total aggregate bases for all seven-year property that qualifies;
ten-year property two percent of total aggregate bases for all ten-year property that qualifies;
fifteen-year property two and one-half percent of total aggregate bases for all or greater fifteen-year or greater property that qualifies.
For purposes of this section, whether property is three-year property, five-year property, seven-year property, ten-year property, or fifteen-year property is determined based on the applicable recovery period for such property under Section 168(e) of the Internal Revenue Code.
(B) For purposes of this section:
(1) "qualified manufacturing and productive equipment property" means any property:
(a) which is used as an integral part of manufacturing or production, or used as an integral part of extraction of or furnishing transportation, communications, electrical energy, gas, water, or sewage disposal services in the economic impact zone;
(b) which is tangible property to which Section 168 of the Internal Revenue Code applies;
(c) which is Section 1245 property (as defined in Section 1245(a)(3)of the Internal Revenue Code); and
(d)(i) the construction, reconstruction, or erection of which is completed by the taxpayer in this State; or
(ii) which is acquired by the taxpayer if the original use of such property commences with the taxpayer inside this State.
(2) In the case of any computer software which is used to control or monitor a manufacturing or production process inside this State and with respect to which depreciation (or amortization in lieu of depreciation) is allowable, the software must be treated as qualified manufacturing and productive equipment property.
(C) This section does not apply to any property to which the other tax credits would apply unless the taxpayer elects to waive the application of the other credits to the property.
(D)(1) Unused credit allowed pursuant to this section may be carried forward for ten years from the close of the tax year in which the credit was earned.
(2) In the case of credit unused within the initial ten-year period, a taxpayer may continue to carry forward unused credits for use in any subsequent tax years if the taxpayer:
(a) is engaged in this State in an activity or activities listed under the North American Industry Classification System Manual (NAICS) Section 31, 32, or 33;
(b)(i) is employing one thousand or more full-time workers in this State and having a total capital investment in this State of not less than five hundred million dollars; or
(ii) is employing eight hundred fifty or more full-time workers in this State and having a total capital investment in this State of not less than seven hundred fifty million dollars; and
(c) made a total capital investment of not less than fifty million dollars in the previous five years.
Credits carried forward beyond the initial ten-year period may not reduce a taxpayer's state income tax liability in any subsequent tax year by more than twenty-five percent.
(E) If during any taxable year and before the end of applicable recovery period for such property as determined under Section 168(e) of the Internal Revenue Code, the taxpayer disposes of or removes from this State qualified manufacturing and productive equipment property, then the tax due under Chapter 6 by the taxpayer for the current taxable year must be increased by an amount of any credit claimed in prior years with respect to such property determined by assuming the credit is earned ratably over the useful life of the property and recapturing pro rata the unearned portion of the credit.
(F) For South Carolina income tax purposes, the basis of the qualified manufacturing and productive equipment property must be reduced by the amount of any credit claimed with respect to the property. If a taxpayer is required to recapture the investment tax credit in accordance with subsection (E), the taxpayer may increase the basis of the property by the amount of any basis reduction attributable with claiming the investment tax credit in prior years. The basis must be increased in the year in which the credit is recaptured.
(G) The credit allowed by this section for investments made after June 30, 1998, is limited to no more than five million dollars for an entity subject to the license tax as provided in Section 12-20-100.
HISTORY: 1995 Act No. 25, Section 2; 1997 Act No. 151, Section 8; 1998 Act No. 419, Part II, Section 49 IIB; 1998 Act No. 442, Section 14B; 2005 Act No. 113, Section 1, eff June 1, 2005; 2010 Act No. 290, Section 21, eff January 1, 2011.
SECTION 12-14-70. Repealed by 2010 Act No. 290, Section 38, eff June 23, 2010.
SECTION 12-14-80. Investment tax credit for manufacturing and productive equipment placed in service.
(A) There is allowed an investment tax credit for any taxable year in which the taxpayer places in service qualified manufacturing and productive equipment and which taxpayer:
(1) is engaged in this State in at least one economic impact zone, as defined in Section 12-14-30(1), in an activity or activities listed under the North American Industry Classification System Manual (NAICS) Section 326;
(2) is employing five thousand or more full-time workers in this State and having a total capital investment in this State of not less than two billion dollars; and
(3) commits to invest five hundred million dollars in capital investment in this State between January 1, 2006, and July 1, 2011.
(B) For purposes of this section, "qualified manufacturing and productive equipment property" means property that satisfies the requirements of Section 12-14-60(B)(1)(a), (b), and (c).
(C) The amount of the credit allowed by this section is equal to the aggregate amount computed based on Section 12-14-60(A)(2).
(D) A taxpayer that qualifies for the tax credit allowed by this section may claim the credit allowed by this section in addition to the credit allowed by Section 12-6-3360 as a credit against withholding taxes imposed by Chapter 8 of this title. The taxpayer must first apply the credit allowed by this section and Section 12-6-3360 against income tax liability. To the extent that the taxpayer has unused credit pursuant to this section for the taxable year after the application of the credits allowed by this section and Section 12-6-3360 against income tax liability, the taxpayer may claim the excess credit as a credit against withholding taxes on its four quarterly withholding tax returns for the taxpayer's taxable year; except that the credit claimed against withholding tax may not exceed fifty percent of the withholding tax shown as due on the return before the application of other credits including other credits pursuant to Section 12-10-80 or 12-10-81. For the period July 1, 2007, to June 30, 2008, a taxpayer using this section may not reduce its state withholding tax to less than the withholding tax remitted for the period June 30, 2006, to July 1, 2007.
(E) Unused credits allowed pursuant to this section may be carried forward for use in a subsequent tax year. During the first ten years of each tax credit carryforward, the credit may not reduce a taxpayer's state income tax liability by more than fifty percent, and for a subsequent year the credit carryforward may not reduce a taxpayer's state income tax liability by more than twenty-five percent. Investment tax credit carryforwards pursuant to this section and credit carryforwards pursuant to Section 12-6-3360 must first be used as a credit against income taxes for that year. Any excess may be used pursuant to subsection (D) as a credit against withholding taxes; except that the limitations of subsection (D) apply each year and the economic impact zone tax credit carryforwards that existed on the effective date of Act 83 of 2007 may not be used to reduce withholding tax liabilities pursuant to this section.
(F) The amount of credit used against withholding taxes must reduce the amount of credit that may be used against income tax liability. The amount of credit used against withholding taxes must reduce the amount of credit that may be used against income taxes.
(G) If the taxpayer disposes of or removes qualified manufacturing and productive equipment property from the State during any taxable year and before the end of applicable recovery period for such property as determined under Section 168(e) of the Internal Revenue Code, then the income tax due pursuant to this chapter for the current taxable year must be increased by an amount of any credit claimed in prior years with respect to that property, determined by assuming the credit is earned ratably over the useful life of the property and recapturing pro rata the unearned portion of the credit. This recapture applies to credit previously claimed as a credit against income taxes pursuant to this chapter or withholding tax pursuant to Chapter 8.
(H) For South Carolina income tax purposes, the basis of the qualified manufacturing and productive equipment property must be reduced by the amount of any credit claimed with respect to the property, whether claimed as a credit against income taxes or withholding. If a taxpayer is required to recapture the credit in accordance with subsection (G), the taxpayer may increase the basis of the property by the amount of basis reduction attributable to claiming the credit in prior years. The basis must be increased in the year in which the credit is recaptured.
(I) A credit must not be taken pursuant to this section for capital investments placed in service outside of an economic impact zone until the taxpayer has invested two hundred million dollars of the five hundred million-dollar investment requirement described in subsection (A)(3), and the taxpayer files a statement with the department stating that it: (i) commits to invest a total of five hundred million dollars in this State between January 1, 2006, and July 1, 2011; and (ii) shall refund any credit received with interest at the rate provided for underpayments of tax if it fails to meet the requirement of subsection (A)(3). This statement and proof of qualification must be filed with the notice required in subsection (J). Credit is not allowed pursuant to this section for property placed in service before June 30, 2007. For credit claimed before the investment of the full five hundred million dollars, the company claiming the credit must execute a waiver of the statute of limitations pursuant to Section 12-54-85, allowing the department to assess the tax for a period commencing with the date that the return on which the credit is claimed is filed and ending three years after the company notifies the department that the full five hundred million dollar investment has been made. A waiver of the statute of limitations must accompany the return on which the credit is claimed.
(J) The taxpayer shall notify the department before taking any credits pursuant to this section. The taxpayer shall state it has met the requirements of subsection (A). Additionally, in a taxable year after the year of qualification for credit pursuant to this section, the taxpayer shall include with its tax return for that year: (i) a statement that the taxpayer has continued to meet the requirements of subsections (A)(1) and (A)(2); (ii) the reconciliation required in subsection (D); and (iii) any statement and support for subsection (I).
HISTORY: 2007 Act No. 83, Section 5.A, eff July 1, 2007; 2007 Act No. 110, Section 2.A, eff July 1, 2007; 2007 Act No. 116, Section 63.A, eff July 1, 2007; 2008 Act No. 313, Section 2.K.1, eff July 1, 2007; 2008 Act No. 354, Section 4.A, eff July 1, 2007.